2022-2023 Ford Bronco Raptor Phantom Front Bumper
Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor
Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor, studio shot
20 inch light bar and aluminum skid plate on the Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor
Parking sensor and tight fitment of the Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor
Knife's Edge style with the Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor
Perfect fitment with the Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor
Centered view of the Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor
Quality steel Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor
Tight fitment with the Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor
Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor, with parking sensors retained
Low profile of the Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor
Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor, ADD Logo cutout
Phantom Front Bumper for the 2022-2023 Ford Bronco Raptor, tow hooks

2022-2023 Ford Bronco Raptor Phantom Front Bumper

F260262110103

Regular price$2,298.98
/
  • Knife's Edge Design 
  • Low-Profile Fitment 
  • Fits a 20” Radius LED Light Bar (Or 5 Cubes) 
  • Made in the USA 
Install Instructions

PRODUCT DESCRIPTION

The Phantom Series Bronco Raptor Front Bumper was engineered with a low-profile, knife’s edge design, giving your Raptor an even more aggressive stance than factory. At the center of the bumper is an inset mounting point for a 20-inch Radius LED Light Bar. Alternatively, (5) 3-inch Light Pods can be mounted at this same location. We include a heavy duty 3/16-inch aluminum front skid plate, which replaces the incompatible factory skid. The skid plate and accent panels are finished in a satin black powder coat, while the bumper is finished in a durable hammer black powder coat. 

The Phantom retains OEM features such as the parking sensors & adaptive cruise control (ACC Relocation Bracket is required.) Provisions for adding frame mounted recovery points are included in the design. As always, this is fully bolt-on and Made in America. 

Features: 

  • Knife's Edge Design 
  • Low-Profile Fitment
  • Fits a 20” Radius LED Light Bar, or (5) 3” Cube Lights 
  • Includes Heavy Duty 3/16” Aluminum Skid Plate to Replace Factory Skid 
  • Retains OEM Parking Sensors 
  • Retains Adaptive Cruise with ACC Relocation Bracket (Sold Separately) 
  • Provisions for Adding Frame Mounted Recovery Points 
  • Durable 2-Stage Hammer Black Powder Coat 
  • Satin Black Aluminum Panel Powder Coat 
  • Fully Bolt-On Installation 
  • Made in the USA

Model

2022-2023 Ford Bronco Raptor

WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

  • Fit & Finish
  • Aluminum Skid
  • Knife’s Edge
  • Center Light
  • Retains OEM Sensors

Fit & Finish

We design our bumpers to have the best fit & finish on the market, ensuring our bumpers not only look great, but are made to last. After sandblasting, we apply a hammer black powder coat finish across the entire bumper.

Aluminum Skid

The included aluminum skid plate is sturdy enough to absorb impacts in rugged terrain, while protecting your vehicle's essential components and undercarriage from dirt and debris. Its satin black powder coat finish adds style as well as protection from weather elements like salt, corrosion, and rust.

Knife’s Edge

Not only does the Phantom fit flush to the front of the Bronco, but it follows the valance and fender bodylines perfectly. No matter what angle you view it from, you will be impressed.

Center Light

Our universal light mount system allows the use of any brand 20 inch radius light bar in the center of the bumper.Alternatively, there are mounting solutions for up to 5 cube lights in that section.

Retains OEM Sensors

The bumper was designed to retain the OEM parking sensors in equipped models.


Our Mission

It’s ADD’s mission to design and build the best off-road parts to fit seamlessly with the lines of your truck or Jeep and perform at the highest level. Our parts are engineered to hold up against the elements and off-road driving. From design to the finished product, we create our bumpers and accessories out of our facility in Chandler, Arizona.

We keep our ear to the street when developing new products and utilize the feedback we receive from the off-road community. We work hard to be sure we’re proud of the products we send out for you to enjoy.