2022-2023 Ford Bronco Raptor Phantom Rear Bumper
Phantom Rear Bumper for the 2022-2023 Ford Bronco Raptor
Low Profile with the Phantom Rear Bumper for the 2022-2023 Ford Bronco Raptor
Recovery points and 3 inch light cubes for the Phantom Rear Bumper for the 2022-2023 Ford Bronco Raptor
Retained tow hook and trailer plugs with the Phantom Rear Bumper for the 2022-2023 Ford Bronco Raptor
Phantom Rear Bumper for the 2022-2023 Ford Bronco Raptor, viewed from standing height
Centered view of the Phantom Rear Bumper for the 2022-2023 Ford Bronco Raptor
Dual cube lights on the Phantom Rear Bumper for the 2022-2023 Ford Bronco Raptor
Write a brief description of the file for people with visual impairment or low-bandwidth connections.
3 inch cube lights and mounting point on the Phantom Rear Bumper for the 2022-2023 Ford Bronco Raptor
Phantom Rear Bumper for the 2022-2023 Ford Bronco Raptor with amber cube light
Retained sensors on the Phantom Rear Bumper for the 2022-2023 Ford Bronco Raptor

2022-2024 Ford Bronco Raptor Phantom Rear Bumper

R260191090103

$1,598.98

Estimated 2-4 Week Lead Time

  • Knife’s Edge Design 
  • Low-Profile Fitment 
  • Backup Sensor Cutouts 
  • 3” Cube Light Mounts 
Install Instructions

PRODUCT DESCRIPTION

The Phantom Series Bronco Raptor Rear Bumper features a knife’s edge, low-profile design to complement the Raptor’s aggressive stance. OEM features including the parking sensors, hitch, & trailer harness/plug are retained in the design. A license plate bracket is included, which relocates the license plate up and away from the bumper along the tailgate. The factory license plate light is retained, and relocated in this new location. The contours of the Phantom enables you to run a 37-inch spare tire on the factory carrier. 

3-inch cube lights can be mounted on each side of the bumper in recessed light mounts for supplemental rear lighting. 1-inch thick clevis mounts that take ¾-inch D-ring shackles provide recovery options if needed. All of our Bronco bumpers are finished in a durable dual-stage hammer black powder coat. As always, this is fully bolt-on and Made in America.

Features: 

  • Knife’s Edge, Low-Profile Design 
  • Inset Mounting Points for 3” Cube Light on Each Side
  • Retains OEM Parking Sensors, Hitch, & Trailer Harness/Plug 
  • Fits up to a 37” Spare Tire on Factory Carrier 
  • 1” Thick Clevis Mounts for ¾” D-Ring Shackles 
  • Durable 2-Stage Hammer Black Powder Coat 
  • Satin Black Powder Coat Aluminum Accent Panels 
  • Fully Bolt-On 
  • Made in the USA 

Model

2022-2024 Ford Bronco Raptor

WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

  • Knife’s Edge
  • Retains OEM Functionality
  • Retains OEM Sensors
  • Side Lights

Knife’s Edge

Not only does the Phantom fit flush to the rear of the bronco, but it follows the valance and fender bodylines perfectly. No matter what angle you view it from, you will be impressed.

Retains OEM Functionality

The bumper was designed to retain the OEM tow hitch, trailer plug, and even allows for fitting up to a 37" spare tire.

Retains OEM Sensors

The bumper was designed to retain the OEM parking sensors in equipped models.

Side Lights

You can mount a cube light behind each side panel of the bumper.


Our Mission

It’s ADD’s mission to design and build the best off-road parts to fit seamlessly with the lines of your truck or Jeep and perform at the highest level. Our parts are engineered to hold up against the elements and off-road driving. From design to the finished product, we create our bumpers and accessories out of our facility in Chandler, Arizona.

We keep our ear to the street when developing new products and utilize the feedback we receive from the off-road community. We work hard to be sure we’re proud of the products we send out for you to enjoy.