2024 Ford F-150 Stealth Fighter Winch Front Bumper
2024 Ford F-150 Stealth Fighter Winch Front Bumper Front View
2024 Ford F-150 Stealth Fighter Winch Front Bumper Corner Angle
Light Bar and Winch on the 2024 Ford F-150 Stealth Fighter Winch Front Bumper
2024 Ford F-150 Stealth Fighter Winch Front Bumper Side Profile
10 Inch Side Lights on the 2024 Ford F-150 Stealth Fighter Winch Front Bumper
Clevis Mount on the 2024 Ford F-150 Stealth Fighter Winch Front Bumper
Parking Sensor on the 2024 Ford F-150 Stealth Fighter Winch Front Bumper
Stealth Fighter Plate on the 2024 Ford F-150 Stealth Fighter Winch Front Bumper

2024 Ford F-150 Stealth Fighter Winch Front Bumper

F1901422860103

$2,599.98
In Stock & Ready to Ship!
  • Radius Plate Steel Design 
  • Heavy-Duty Winch Mount 
  • Center Mount for (1) 40” Radius Light Bar or (10) Cube Lights 
  • Side Mounts for (1) 10” SR Light Bar or (1) Cube Light 
  • Made in the USA 
Install Instructions

PRODUCT DESCRIPTION

Our Stealth Fighter Winch Front Bumper combines aggressive styling and off-road utility for the ultimate upgrade to your F-150. The heavy-duty winch mount and integrated clevis mounts for soft shackles offer full vehicle recovery capabilities when on the trail. The center mount is designed to run one 40-inch radius light bar or ten cube lights, while each side mount can be fitted with a 10-inch single row light bar or one cube light.

This F-150 Front Bumper closely follows the radiused front edge of your truck for elevated styling. Our bumpers are made from American steel, finished in a dual-stage hammer black powder coat finish, and include satin black accent panels for a sleek and durable design. The bumper is compatible with sensor and non-sensor models due to the integrated cutouts. As always, the Stealth Fighter Bumper is fully bolt-on and made in the USA.

Please Note: 

** The High Mount Intercooler Upgrade Kit is required for 3.5L models.

** This bumper is not compatible with 2.7L EcoBoost or Diesel models.

** Power Boost models require the pedestrian alert speaker to be relocated.

** The Adaptive Cruise Control Relocation Bracket is required for models equipped with ACC.

** Adaptive cruise control not compatible with Platinum, King Ranch models, or brush nickel finished grilles

KEY FEATURES:

  • Radius Plate Steel Design
  • Heavy-Duty Winch Mount
  • Reinforced Clevis Mounts for Soft Shackles
  • Center Mount for (1) 40” Radius Light Bar or (10) Cube Lights
  • Side Mounts for (1) 10” SR Light Bar or (1) Cube Light
  • Sensor Cutouts
  • Included Shutter Motor Bracket
  • 2-Stage Hammer Black Powder Coat Finish
  • Satin Black Powder Coated Accent Panels
  • Fully Bolt-On Installation
  • Steel Construction
  • Made in the USA

Model

2024 Ford F-150

WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

  • Fit & Finish
  • Lighting
  • Steel Plate Design
  • Concealed Winch Mount

Fit & Finish

We design our bumpers to have the best fit & finish on the market, ensuring our bumpers not only look great, but are made to last. After sandblasting, we apply a hammer black powder coat finish across the entire bumper.

Lighting

Our universal light mount system allows the use of any brand 40-inch light bar in the center of the bumper. Alternatively, there are mounting solutions for up to 10 cube lights in that section.

Steel Plate Design

A radius plate steel design ensures the Stealth Fighter can sit as close to flush as possible to the truck for a clean look while allowing the use of a curved light bar.

Concealed Winch Mount

A separate winch mounting plate is used to position the winch between the frame rails to maintain the bumper's low-profile fitment. Additionally, the winch plate mounts directly to the truck's frame for strength.


Our Mission

It’s ADD’s mission to design and build the best off-road parts to fit seamlessly with the lines of your truck or Jeep and perform at the highest level. Our parts are engineered to hold up against the elements and off-road driving. From design to the finished product, we create our bumpers and accessories out of our facility in Chandler, Arizona.

We keep our ear to the street when developing new products and utilize the feedback we receive from the off-road community. We work hard to be sure we’re proud of the products we send out for you to enjoy.