2021 Ford Bronco Wildtrak SEMA Build by ADD Offroad

2021 Ford Bronco Wildtrak SEMA Build by ADD Offroad

 

We customized our Race Red 2021 Ford Bronco Wildtrak for our booth at the 2021 SEMA Show. We've been busy designing aftermarket bumpers and parts for the next-gen Bronco, and we're excited to show them off! If you're coming to the SEMA Show Friday Experience, be sure to stop by our booth (#550077) to see this Bronco, a 3rd-gen Raptor, and a TRX! Don't forget to stop by Ford's booth to see the special Raptor build we did for them!

2021 Ford Bronco ADD Offroad SEMA Build
 

The Wildtrak already comes equipped with the Sasquatch Package, which gives it a 2-inch lift compared with the stock Bronco's height. We decided we wanted it to sit a little bit higher. We got an upgrade designed for the new Bronco from BDS Suspension. This includes upper control arms and utilized Bilstein Position-Sensitive True Monotube Dampers giving it another 2-inches of lift. This brought our total lift to 4-inches. We then added Dirty Life's Mesa 17-inch Black Beadlock Wheels, and paint matched the beadlock rings Race Red. Wrapped around the wheels are Nitto Trail Grappler M/T 37x12.50R17 tires, giving our Wildtrak a formidable stance.

On the front end we installed our Bronco Bomber Front Bumper, which is slated to be released next week. The Bomber is designed to increase ground clearance and the approach angle, while providing protection to the front of your Bronco. The Bomber hugs the lines of your Bronco, and keeps the wings of the bumpers minimal in size to clear obstacles on the edge of your trail. We've installed 3 Rigid 360 6-inch LED lights with a red backglow in the center of the bumper. On both wings of the bumper are Rigid D-Series PRO Spot LED cube lights for suplemental lighting in dark conditions.

The back of the Bronco features our Bomber Rear Bumper, which also has a low-profile design to keep the lines of your Bronco nice and tight. Installed towards the ends of the bumper are 2 Rigid D-Series PRO Spot LED cube lights to light the rear when loading or unloading the gate or working behind your vehicle.

We took the Factory Ford Steel Rock Sliders off of a Badlands Bronco, and installed them on our Wildtrak. They tie-in beautifully with the front and rear Bomber bumpers. We had a splash graphic designed for the rear 1/3 of the truck by the one and only Chip Foose. It's a black design that marries the Race Red paint job to the black bumpers and trim.

Stay tuned for more information on the 2021 SEMA Show, as we will be grabbing lots of photos of other builds that include our parts. Follow us on social media, or sign up for our newsletter for the latest information!

Build Sponsors

Parts List

2021 Ford Bronco SEMA Build Pictures


Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.