2021 Ford Raptor SEMA Build by ADD Offroad

2021 Ford Raptor SEMA Build by ADD Offroad

We customized a 2021 Ford Raptor to be shown in Ford's booth at this years SEMA Show. We were lucky to get a gen-3 Raptor from Ford before they hit the streets, so we were able to get to work on it early. If you're coming to the SEMA Show Friday Experience, be sure to stop by Ford's booth to see this one-of-a-kind Raptor. We'll have another Raptor, a TRX, and our Bronco Wildtrak in our booth so be sure to come on by to see them all.

2021 Ford Raptor ADD Offroad SEMA Build

The first thing we did was send the Raptor to John Condon at East Valley Collision, where he gave it a beautiful custom paint job. The bulk of the truck is black, which then transitions towards the rear to Ford's Leadfoot Grey via yellow striping along the sides. The hood was also painted with yellow pin striping bordering the cowl panel. The roof of the truck is painted grey to tie in with the rear of the truck. We then finished it off by adding the Raptor graphic back on along the bed in it's usual placement.

We installed our brand new 2021+ Raptor Bomber Front Bumper with four Rigid 360 6-inch lights that include custom amber lenses. Towards either end of the bumper are two Rigid D-Series Pro Spot Cube lights. At the rear, we installed the new 2021 Raptor Bomber Front Bumper that includes two rear facing Rigid D-Series Pro Spot Cube Lights. This new version of our Raptor Bombers brings with it our longstanding trademark-look that the Raptor community has loved for years. Both bumpers were painted in Leadfoot Grey, and the panels and skid plate are powder coated in Satin Black. The tow hitch frame and receiver were painted black and layered with clear coat to match the body. 

In the truck's bed we installed 2 of our Universal Tire Carriers holding 2 full-size spares. Atop the bed is our ADD PRO Chase Rack that's holding five more Rigid 360 6-inch lights with custom amber lenses. The mount that holds these lights is controlled with an actuator that can lower the bar and lights to rest below the roof line for fitting into tight spaces like a garage. BF Goodrich Baja T/A 37-inch Desert Race Tires are wrapped around our 17-inch F-150/Raptor ADD PRO Wheels. The wheels were painted Leadfoot Grey, with the beadlock rings painted in yellow. ADD Offroad Ford F-Series Rock Slider Side Steps finished in a hammer black powder coat with fully gusseted bottoms complete the build.

Stay tuned for more information on SEMA Show 2021, and the various builds by other vendors that ADD Offroad parts were included in. We'll also be releasing more parts for the 2021 Ford Raptor such as the Stealth Fighter and Honey Badger line of parts in the coming weeks, so be sure to keep your eyes peeled on our social media for the announcements. Or, sign up to our newsletter for all the latest news for the off-road community.

Build Sponsors

Parts List

2021 Ford Raptor SEMA Build Pictures

1 comment

  • jorge hernandez

    Do you sell those recovery hooks the yellow ones in the bumpers ?
    I need them I have the same bumpers w out it
    Please let me know
    Addictive Desert Designs replied:
    We had our paint shop custom paint them. You could have a body shop knock that out for you. ________________________________

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Beyond the Bumper: Part 2 - Welding/Quality Control
In Part 1 of "Beyond the Bumper" we featured our laser and bend department, where the bumper manufacturing process begins! In this episode, we take you behind the scenes into our welding and quality control departments, crucial stages in the...
The 2025 Ram 1500 RHO: The TRX Successor
The off-roading world is in anticipation as the 2025 Ram 1500 RHO prepares to make its debut, succeeding the RAM TRX. The TRX, known for its 702-horsepower supercharged V-8, has been an icon among off-road enthusiasts over the past couple of...
Beyond the Bumper: Part 1 - Laser | Bend
Welcome to "Beyond the Bumper," a new series brought to you by Addictive Desert Designs in Chandler, Arizona. Part 1 of this multi-part series features our laser and bend department, where the bumper manufacturing process begins! What starts as a...