We've Started a Full Build-Out on this Rubicon 392

We've Started a Full Build-Out on this Rubicon 392

*** Full Parts List Below ***

We're decking out a 2021 Jeep Wrangler Rubicon 392 with loads of ADD Offroad parts as well as a few extras. This will be a full rock-crawler build in order to harness all that extra 6.4L HEMI V8 power for tackling obstacles on the trail.

 
2021 Rubicon 392
 

The front end is getting a make-over with our Rock Fighter Winch Front Bumper with an ADD Capture Fairlead and the DV8 Offroad 12,000 lb Winch with Synthetic Line. It'll also have extra protection with our Jeep JL Sway Bar Skid Plate.

 
2021 Rubicon 392
 

The rear end is getting our Stealth Fighter HD Rear Bumper and the Stealth Fighter Tire Carrier that swings open with the tailgate. Attached to the tailgate is DV8 Offroad's Jeep JL Trail Folding Table, which is great when camping on the trail.

 
Rubicon 392 Fender Replacement
 

For the sides of the Jeep we'll be installing our Rock Sliders. The front fenders will be replaced with our Stealth Fighter Front Fenders and the Rock Fighter Front Inner Fender Liners. The rear fenders will be replaced with our Stealth Fighter Rear Fenders.

 
37-Inch Tires
 

She'll be rolling on BF Goodrich 37-Inch All Terrain tires wrapped around our ADD Stealth Fighter Wheels. This will have a 3" Fabtech Trail System with Dirt Logic 2.25 Resi Shocks installed, as well as their High Clearance Dirt Logic 2.0 Steering Stabilizer Kit.

 
Off-Road Parts
 

As far as lighting goes, we've got the Baja Designs 20" Driving/Combo LED Light Bar in the front bumper, as well as a pair of Baja Designs Squadron Sport Air Spot LED Cube Lights & a pair of Baja Designs Squadron Sport Air Driving/Combo LED Cube Lights. The rear bumper will also have a pair of the same BD Driving/Combo LED Cube Lights. The rock sliders will have the Rigid Industries A-Series LED Rock Lights. We may also do some custom accessories inside the cab, such as custom leather grab handles.

Stay tuned to see how she turns out, it's gonna be a real trail beast when it's finished!

Full Parts List

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Beyond the Bumper: Part 2 - Welding/Quality Control
In Part 1 of "Beyond the Bumper" we featured our laser and bend department, where the bumper manufacturing process begins! In this episode, we take you behind the scenes into our welding and quality control departments, crucial stages in the...
The 2025 Ram 1500 RHO: The TRX Successor
The off-roading world is in anticipation as the 2025 Ram 1500 RHO prepares to make its debut, succeeding the RAM TRX. The TRX, known for its 702-horsepower supercharged V-8, has been an icon among off-road enthusiasts over the past couple of...
Beyond the Bumper: Part 1 - Laser | Bend
Welcome to "Beyond the Bumper," a new series brought to you by Addictive Desert Designs in Chandler, Arizona. Part 1 of this multi-part series features our laser and bend department, where the bumper manufacturing process begins! What starts as a...